Rotary drum pumps with casing made of PP, INOX, PVC, PVDF, ALU, CAST IRON, PE and ABS.
It is suitable for
various liquids, including very aggressive ones. Various flow rates are available.
| Materials | PP + SS (shaft) |
| Maximum flow rate | 0.45 l / course |
| Length | from 340 to 900 mm |
| Consolidation | FKM |
| Materials | PP + SS (shaft) |
| Maximum flow rate | 0.45 l / course |
| Length | from 340 to 900mm |
| Consolidation | NBR |
| Materials | PP + PP (shaft) |
| Maximum flow rate | 0,3 l/course |
| Length | z 340 do 900 mm |
| Consolidation | FKM-NBR-EPDM-FOOD |
| Materials | AISI 316 |
| Maximum flow rate | 0.3-0.6 l/course |
| Length | from 700 to 1000mm |
| Consolidation | PTFE |
| Materials | PE + PVC |
| Maximum flow rate | 0.08 l |
| Length | 850mm |
| Material | PP+SS |
| Maximum flow rate | 20 l/min |
| Maksymalna lepkość | 400 mPas |
| Consolidation | FKM-NBR-EPDM |
| Materials | PVDF |
| Maximum flow rate | 0.3 l/course |
| Length | 3x35 cm |
| Consolidation | PTFE |
| Materials | PP |
| Maximum flow rate | 0.5 l/course |
| Length | from 340 do 900 mm |
| Consolidation | FKM |
